|
|
| |
|
| MAXIMA
CH2 Current Hook |
|
- 100 Amps AC*.
- Worklight.
- Reach Wires In Close Spaces.
- UL-Listed & CE-mark Certificated.
|
|
| SPECIFICATIONS
|
| AC Amps Measurement
(40 to 400Hz) |
| Range |
Resolution |
Accuracy |
Overload Protection |
| 40A |
0.01A |
±2.0% + 20dgts |
600V
|
| 100A |
0.1A |
|
* 100A Range Only for 127.
* 45 Hz to 400 Hz True RMS(Crest factor < 3:1) for 129T.
* Interference
for adjacent wires is 0.03A/1A. |
|
|
|
|
| |
The optional
Extended Current Hook will only
work with the Maxima
ClampDMM¢â Series and gives a new and unique
advantage to technicians. With this
design it is now easy to measure where
space is limited, or where several
measurements are needed quickly.
The Current Hook can reach into control
boxes and distribution panels to obtain
readings on wires 6mm in diameter or
smaller. With a head that is only 2.5cm
wide by 14cm deep, The Current
Hook
can access work spaces most clamp meters
can't. To increase safety, illuminate
your workspace with the popular worklight.
|
|
|
|
|
| |
Remove existing
Clamp Head from the |
| Maxima
base unit by pulling firmly upward. |
|
Align the
Hook with the base unit |
| connections
and push together until they |
click into
place. |
|
|
|
|
| |
Please contact us for more information
at; |
|
FINE INSTRUMENTS CORP.
Tel : +82-31-470-8888
Fax : +82-31-470-8887
Room # 601, DAEWOO TECHNOPIA, 768-1, WONSI-DONG, DANWON-GU,
ANSAN-SI,GYEONGGI-DO, SOUTH KOREA
E-mail : fine@finest.co.kr
|
