FTL-2000 Double Skin Silicone Test Lead Kit for Automotive Application
With safety shrouded right angle banana plug to retractable straight banana plug and superior strain relief.
Rated for IEC 1010-1, CAT III 1000V, 10A maximum.
One red/one black/one blue


FTL-716 Test Lead Set
Safety-shrouded right-angle inputs. 48" (1.2m), 1000V, 10A maximum. One red, one black, one green. Conforms to UL 3111-1 and IEC 1010-1.
For the Finest 716 automotive meter only.


FTL-500V1 Test Lead Set
Safety-shrouded right-angle inputs. 48" (1.2m), 1000V, 10A maximum. One red, one black. Conforms to IEC 1010-1 and UL 3111-1.
UL/cUL-listed and CE-mark certificated.


FTL-500 Test Lead Set
Safety-shrouded right-angle inputs. 48" (1.2m), 1000V, 10A maximum. One red, one black. Conforms to IEC 1010-1 and CE-mark certificated.


FTL-MX Test Lead Set
Safety-shrouded right-angle inputs. 40" (1m), 1000V, 10A maximum. One red, one black. Conforms to UL 61010-2-031(2003) and IEC 61010-2-031(2002), EN 61010-2-031(2002), UL/cUL-listed and CE-mark certificated.


Sheilded Test Leads(One red, one yellow)
For Finest Automotive Scopes and Series 796.
With male BNC connector and Silicone cable
59" (1.5 m), Ø5.0 mm
CAT III 600 V, 1 A maximum.
Conforms to UL 61010B-1, UL 61010-2-031, CAN/CSA-C22.2 No.1010-1, IEC 1010-1 and IEC 1010-2-031, UL/cUL-listed and CE-mark certificated.


Ground Leads for Shielded Test Leads
For use with FSTL-1000
With female straight banana plug, silicone cable, and retractable straight banana plug.
59" (1.5 m), Ø3.0 mm
Conforms to UL 61010B-1 and IEC 1010-1


Secondary Capacitive Pickup
For Finest 1005 and 1006 Automotive Scopes.
With male BNC connector, RG58 cable, and Ignition molded connector clip.
71" (1.8 m), Ø5.0 mm


5 Way Alligator Clips
Industry-standard for Auto- motive and Telecom applications. 5 ways to connect.
With banana plug, large penetrator and bed of nails.
Rated for 600V, 10A maximum.
Available in red, black, yellow, green, and blue.


Back Probe Pins
For Shielded Test Leads or Ground Leads for Automotive Scopes and series 796.
Ø1 mm
One red, one black, one yellow.


2 mm Adaptors
For Shielded Test Leads or Ground Leads for Automotive Scopes and series 796.
Ø2 mm
One red, one black, one yellow.


Diesel Interface Probe
For Finest 1005 and 1006 Automotive Scopes.
With male BNC connector to ground clip and Piezo sensor (4 mm to 6 mm) connector 59" (1.5 mm), Ø5.0 mm


Alligator Clips
Slip-on alligator clips for the Finest test leads.
Standard jaw opening of 0.313" (8mm). Rated for IEC 1010-1, CAT III 1000V, 10A maximum.
One red, one black.


Single Cylinder Secondary Ignition Probe
Capacitive pickup to measure automotive high voltage ignition signals from the plug wire.
With safety banana plugs, RG58 cable, ground clip and molded connector clip. 6.6 ft, Wt. I lb.8 oz.


RPM206 Inductive Pickup
For use with Finest 206, Finest 506/516, Finest 226/229 Automotive meters Finest 1005/1006 Automotive Scopes and series 796. The Inductive Pickup converts the magnetic field generated by the current in the spark plug wire to a pulse that triggers the Automotive meter's RPM measurement.


Kelvin Clip Test Leads Set
For Finest CLM33 cable length meter.


RS50 RS-232C Interface Cable(1.5m)
For use only with 509/516. DB-9 male connector to DB-25 female connector.

  


RS70 Phototronic RS-232C Interface Cable(1.5m)
For use only with
716/707/705.
Phototronic connector to DB-9 female connector.


USB Interface Kit
For Finest 1005/1006, Series 796 and Series 600.
With type A male connectors on both ends of the 59" (1.5 m) cable and Firmware Loader Software disc..


Temperature Probe
For Finest Automotive Scopes and series 796.
With male BNC connector.
Teflon tape insulation. No suitable for liquides.
Measurement Range :
-40 °C to +1,370 °C
(-40 °F to +2,498 °F)
Accuracy :
±(3°C + 1digit) for -40°C to9°C
±(1% + 1°C) for 10°C to 400°C
±3% of reading for 401°C to 1,370°C
Restrictions : Must be used in Teflon - compatible environments and is not suitable for liquid immersion.


K-Type Temperature Probe with Banana Plug
General purpose. Teflon tape insulation. Usable without TP1A Temperature Probe Adaptor. Not suitable for liquid immersion.
Measurement Range :
-40°C to + 1,370°C
(-40°F to + 2,498°F)
Accuracy :
±(3°C + 1dgt) for -40°C to 9°C
±(1% + 1°C) for -10°C to400°C
±3% of reading for 401°C to 1,370°C


K-Type Thermocouple
For MAXIMA series only.
Teflon tape insulation. No suitable for liquides.
Measurement Range :
-200°C to + 1,370°C
(-328°F to + 2,498°F)
Accuracy :
±[0.1% + 0.5°C (1.0 °F)]
[Below -100°C (-148°F) add 0.2% of reading]
Restrictions : Must be used in Teflon - compatible environments and is not suitable for liquid immersion.


K-, J-, T-, E-Type Thermocouple
For Series 600 Thermometers only.
Teflon tape insulation.
No suitable for liquides.
Measurement Range :
K-Type: -200°C to +1,370°C
              (-328°F to +2498°F)
J-Type: -210°C to +1,200°C
              (-346°F to +2192°F)
T-Type: -250°C to +400°C
              (-418°F to +752°F)
E-Type: -150°C to +1,000°C
              (-238°F to +1832°F)
Accuracy :
K,J,T, and E-type: ±[0.1% + 0.5°C(1.0°F)]
[Below -100°C(-148°): add 0.2% of reading for K,J, and E-type: and 0.1% of reading for T-type.]
Restrictions : Must be used in Teflon - compatible environments and is not suitable for liquid immersion.


TP1 K-Type Temperature Probe
General purpose. Teflon tape insulation.
Not suitable for liquides.
Measurement Range :
-40°C to + 1,370°C
(-40°F to + 2,498°F)
Accuracy :
±(3°C + 1digit) for -40°C to9°C
±(1% + 1°C) for 10°C to 400°C
±3% of reading for 401°C to 1,370°C
Restrictions :
Must be used in Teflon-compatible environments and is not suitable for liquid immersion.


TP1A Temperature Probe Adaptor
K-type thermocouple adaptor designed to use with TP1.
Measurement Range:
-40°C to + 1,370°C
(-40°F to + 2.498°F)
Plug directly into "COM" and "TEMP" input terminals.

Waveform Manager
For Finest 1005/1006 Automotive Scopes only.
This software works with all four common data types available from scopes including waveforms, screen images, meter reading and setups. It provides easy annotation and composition of waveform pictures along with graphics file export in popular bitmap formats.
Includes support for automatic data logging, transient capture and waveform database storage.


Software CD for the 707/705's RS-232C Interface
For the RS-232C interface of the 707/705 through the phototronic serial port. WS 70 is WINDOWS version.


Software CD for the 716's RS-232C Interface
For the RS-232C interface of the 716 through the phototronic serial port.
WS 716 is WINDOWS version.


Software CD
For demonstration of RS-232C interface between 509/516, and PC. DS509 is a DOS disc for the 509. WS 509 is a WINDOWS disc for the 509. WS516 is a WINDOWS disc for the 516 and DS516 is a DOS disc for the 516.


H1C Hard Carrying Case
This rugged case provides any Finest DMM or clamp meter & most Finest accessories with maximum protection against rough handling and adverse weather conditions.

  
S1C Soft Carrying Case
Thickly padded vinyl with tough exterior and interior and heavy-duty zipper.
Holds DMM and test leads. For use with any Finest DMM or Automotive Meters. Includes an inside pocket for test leads or small accessories.
Size : Various


S2C Soft Carrying Case
Thickly padded nylon with tough exterior and interior and rugged velcro closure.
Holds clamp meters and test leads. Includes an inside pocket for test leads or small accessories.
Size : Various


S3C Soft Carrying Case
For Finest 1005/1006, and Series 796.
Thickly padded nylon with tough exterior and interior, and heavy-duty zipper and rugged velcro closure. Includes various pockets for small accessories.
Size : 370 x 270 x 90 mm


S4C Soft Carrying Case
Thickly padded vinyl tough exterior and interior and heavy-duty zipper.
Size : 235 x 85 x 55 mm


C130 Replacement Holster
For Finest 130 Series clamp-on meters. Protects meter display, and has a convenient belt clip for hands free carrying. Rugged velcro closure makes it easy to access meter even when wearing gloves.


C110S Carrying Case
For Finest 110 Series clamp-on meters. Protects meter and all accessories.


C1G/C1Y Holster with Stand
The C1G/C1Y fit Finest 200 Series, Two Button Series. 215 and 206 mulitmeters. Yellow version (C1Y) is standard and Grey version (C1G) is optional.
The C1G/C1Y includes tilt stand, belt loop, pipe hook, etc. for best viewing position of meter.


C2G/C2Y Holster with Stand
The C2G/C2Y fit any DMM of Finest 500 Series. Yellow version (C2Y) is standard and Grey version (C2G) is optional. The C2G/C2Y includes a stand rest for best viewing position of meter.


C3G/C3Y Holster with Stand
The C3G/C3Y fit any DMM of Finest 220 Series. Yellow version (C3Y) is standard and Grey version (C3G) is optional. The C3G/C3Y includes a stand rest for best viewing position of meter and test leads holders.


C4B/C4G Holster with Stand
The C4B/C4G fit the Finest 24/25/229 multimeters. Blue version (C4B) is standard and Gray version (C4G) is optional. The C4B/C4G includes a stand rest for best viewing position of meter.


Hand-Free¢â Holster
Enables you to use your two hands very conveniently when taking remote measurement under hard-to-stand areas of a Finest digital multimeter. The holster is equipped with a Magnetic stand.
Size : same as C1G/C1Y/C2G/C2Y.


TLH 12 Test Leads Holder
For Finest 200/500 Series DMMs.
Enables you to store the test leads set on the stand while unused.


Capacitance Adapter
The CAP 7 capacitance adapter enables the user to measure capacitances when using with most digital multimeters having the DC 400 mV range.
(Range : 40 µF/400 µF, Accuracy : 2.5 % + 5 d)


3-Phase Adaptor for the 170 Power Meter Only
Generates an artificial neutral point when measuring true power, apparent power or power factor with the Finest 170 in a either Balanced or Unbalanced 3 phase / 3 wire power distribution system.


CH2 Current Hook for the MAXIMA Series Only
The Hook can reach into control boxes and distribution panels to obtain readings on wires 6mm in diameter or smaller, and access work spaces most clamp meters can't.


Safety - Designed Dual Banana Plug to Female BNC Adaptor
+(Signal) and -(ground;GND)shrouded 4mm banana plugs connect to a shrouded female BNC connector. Maximum voltage to ground of 600V.

  
Alligator Clip Adapter
With two alligator clips to the male BNC connector and superior strain relief.
20 cm(7.9"). 250 V RMS protected.
For Series 900 TDR meters only.


RJ45 to RJ45 Patch Cable & Female Coupler
With RJ45 connectors on both ends of the 60 cm(23.7") patch cable and the RJ45's female coupler.
Fro the 901 TDR LAN Cable Tester only.


Male BNC to Female RJ45 Adapter
Male BNC to female RJ45 adapter with a rotary selector to select 4 pairs of a twisted pair cable. Very useful for measuring the length of each pair.
For Series 900 TDR meters only.


Female RJ45 to Female BNC Remote Identifier
These Remote Identifiers will make WIRE MAP tests for twisted pair cables a breeze.
For the 901 TDR LAN Cable Tester only.


AC to DC Power Adaptor
For Finest 1005/1006 and series 796 only.
71" (1.8 m)
Input : 230 V / 50 Hz
Output : 12 V DC 800 mA
CE-mark certificated.


AC to DC Power Adaptor
For Finest 1005/1006 and series 796 only.
71" (1.8 m)
Input : 120 V / 60 Hz
Output : 12 V DC 800 mA
UL/cUL-listed and CE-mark certificated.


Isolated 12 V Charger, Isolated 24 V Charger
For Finest 1005/1006 and Series 796 only.
118" (3 m)
Cigarette lighter plug to coaxial power plug.


Power Cable 2 (compatible with Vehicle Battery)
For Series 796 Scan Tools only.
With two alligator clips to female Cigarette lighter connector.
20" (0.5 m)


OBD II Code Reader Cable
For Finest 1006 Automotive Scope only.
With 16 pin DLC connector and male 7 pin DIN connector.
59" (1.5 m), Ø7.0 mm


OBD II Main Connector
For Series 796 Scan Tools only.
With 16 pin DLC connector to Main connector.
79" (2 m)


Hyundai/Mitsubishi 12 pin Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 12 pin connector.


Kia 20 pin Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 20 pin connector.


GM Daewoo 14 pin Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 14 pin connector.


Samsung/Nissan 14 pin Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 14 pin connector.


Ssangyong 14 pin Circular Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 14 pin connector.


Ssangyong 20 pin Rectangular Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 20 pin connector.


Kia 20 pin Adaptor
For Finest 796K Scan Tool only.
With 16 pin DLC connector to 20 pin connector.


Kia 6 pin Adaptor
For Finest 796K Scan Tool only.
For Optima, Optima Regal, Carens II, X-Trek, Sorento and Rio SF only. With 16 pin DLC connector to 6 pin connector.


Ni-HM Rechargeable Battery (1.2 V x 5) Pack
For Finest 1005/1006.
5 x AA type (1.2 V) Ni-MH Battery Pack
Nominal Voltage : 6.0 V
Capacity : 1600 mAh